雙組份打膠機：原理跟雙液點膠機相同，依據客戶AB膠桶量身訂制兩個壓盤，把膠桶放入壓盤下，經過壓盤壓膠再經過定量泵配比、混合、定量打到產品上?，F(xiàn)在市道的中空玻璃打膠機大多數為活塞式打膠，因?yàn)榛钊接幸粋€抽膠的進程，經常會導致打膠的線條忽大忽小，所以我司的中空玻璃雙組份打膠機都是以可連續性供膠的精密齒輪泵抽膠，這樣可確保打膠線條均勻，不會有忽大忽小的狀況呈現。
Two component gluing machine: the principle is the same as that of the double liquid dispensing machine. Two pressure plates are customized according to the customer's AB glue barrel. Put the glue barrel under the pressure plate, press the glue through the pressure plate, and then mix, mix and quantitatively hit the product through the quantitative pump. At present, most of the hollow glass dispensers in Shidao are piston type. Because the piston type has a process of drawing glue, which often causes the glue line to fluctuate from big to small. Therefore, our hollow glass two-component dispensers are all pumping glue with precision gear pumps that can continuously supply glue, which can ensure that the glue line is even and will not fluctuate from big to small.

雙組份打膠機依據自動化程度可分為：半自動打膠機及全自動打膠機。
According to the degree of automation, the two-component gluing machine can be divided into: semi-automatic gluing machine and full-automatic gluing machine.
半自動中空玻璃打膠機：半自動打膠機僅僅把膠水配比、混合、定量打膠的設備，再配備手持式打膠槍，因?yàn)橹锌詹Ａ?biāo)準都較大，需人手移動打膠槍把膠水打到中空玻璃上。
Semi automatic hollow glass gluing machine: the semi-automatic gluing machine is only equipped with glue proportioning, mixing and quantitative gluing equipment, and a hand-held gluing gun. Because the standards of hollow glass are large, it is necessary to move the gluing gun manually to hit the glue on the hollow glass.
全自動中空玻璃打膠機：全自動中空玻璃打膠機配備三軸機械手，三軸機械手跟打膠機一致通訊，相互配合，打膠機把膠水配比、混合后定量供到三軸機械手，三軸機械手可完成半圓、圓形、半圓弧、四方形、三角形等各種不規則形狀打膠作業。行程依據客戶玻璃大尺度定制。
Full automatic hollow glass gluing machine: the full-automatic hollow glass gluing machine is equipped with three-axis manipulator. The three-axis manipulator communicates with the gluing machine and cooperates with each other. The gluing machine supplies the glue proportion and mixing to the three-axis manipulator quantitatively. The three-axis manipulator can complete all kinds of irregular shape gluing operations such as semicircle, circle, semicircle, square, triangle, etc. The itinerary is customized according to the largest scale of customer's glass.
中空玻璃雙組份打膠機特色：
Features of hollow glass two-component gluing machine:
1.配比合理、定量準確不會呈現打膠線條忽大忽小的狀況
1. Accurate ratio and quantitative accuracy will not show the situation that the gluing line is big or small
2.經過進口高精度齒輪泵抽膠，安穩性高運用壽數長。
2. After imported high-precision gear pump, it has high stability and long service life.
3.加裝限位報警功用，壓盤壓到桶底后，設備發出聲光報警提示工作人員更換膠桶。
3. The limit alarm function is added. After the pressure plate is pressed to the bottom of the barrel, the equipment will give an audible and visual alarm to remind the staff to replace the rubber barrel.
4.出膠巨細可依據實際狀況自由調理。
4. The size of the glue can be adjusted freely according to the actual situation.
三軸機部分特色：
Features of triaxial machine:
1.運用工控電腦配合進口伺服電機，運轉安穩，準確。
1. Use professional industrial control computer with imported servo motor to ensure stable and accurate operation.
2.教訓式編程，編程方便快捷。
2. Lesson based programming is convenient and fast.
3.存儲容量：2500點以上編程點。
3. Storage capacity: more than 2500 programming points.
4.可選配滾珠渠道或流水線作業功用，使出產功率更快捷。
4. Ball channel or assembly line operation function can be selected to make the output power more efficient.
適用膠水：硅酮膠、高粘度硅膠、玻璃膠等高粘度膠水流體控制作業。
Applicable glue: silicone glue, high viscosity silica gel, glass glue and other high viscosity glue fluid control operation.