選用雙液點膠機需思索哪些要點
What key points should be considered in selecting double-liquid dispenser
所使用的是雙組份膠水，在出膠控制方面采用了愈加復雜的工藝方式，自動化智能化的操作形式，爲點膠提供了很大的方便。上面，紅杉來給大說說選用雙液點膠機需思索哪些要點。
The use of two-component glue, in the glue production control using more complex process, automatic and intelligent operation form, for dispensing provides a great deal of convenience. Above, Sequoia comes to tell us what points should be considered in selecting a double-liquid dispenser.
1、所用膠水的混合比例。明顯一種點膠機對膠水的混合比例都有一個范圍，罕見的有100：100——100：10;假如所用的膠水不在這個范圍，那就要重新思索了。
1. The mixing ratio of glue used. Any dispensing machine has a range of glue mixing ratio, rare 100:100-100:10; if the glue used is not in this range, it should be rethinked.
2、膠水外面有沒有填料，如氧化鋁，氧化硅，石英砂，陶瓷等。假如有填料，在選用雙液點膠機時，就需求慎重思索。雙液點膠機控制出膠量的方式有兩種，一種是經過齒輪泵，一種是經過螺桿泵!齒輪泵在遇到含有填料的膠水時，工夫久了易磨損，進而形成出膠量不準，混合比例不準確，呈現點出來的產品長工夫不干。螺桿泵相比擬而言，較耐磨損一些，這些可參考一下這兩種泵的材料!
2. Is there any filler outside the glue, such as alumina, silica, quartz sand, ceramics, etc. If there are fillers, careful consideration is needed when selecting a double-liquid dispensing machine. There are two ways to control the glue quantity of double-liquid dispensing machine, one is through gear pump, the other is through screw pump. When the gear pump encounters glue containing filler, it takes a long time to wear and tear, and then forms the inaccurate glue quantity, inaccurate mixing proportion, and the product that presents the point does not work long time. Compared with screw pumps, they are more wear-resistant. These can refer to the materials of these two pumps! uuuuuuuuuu

3、需求點膠的產品，每次小的點膠量是多少，比方你要點的產品是1克，膠水配比是10：1，那相當于B膠的出膠量要到達0.1克，機器的小出膠量是多少，你買點膠機時就要比照剖析，看能否到達要求!3.點膠工藝的要求，要不抽真空，將膠水外面的氣泡抽出。
3. What's the minimum amount of dispensing per time for products requiring dispensing? For example, the product you ordered is 1 gram and the ratio of glue is 10:1. That's equivalent to 0.1 g of B glue. When you buy a dispensing machine, you need to compare and analyze it to see if you can meet the requirements. 3. The requirements of dispensing process, if you don't vacuum, you should extract the bubbles outside the glue.
4、消費的產量，量大的話可思索帶XYZ機械手，或許多并頭的點膠機，量小的話，用單頭，甚至不帶XYZ機械手的都可完成。
4. Consumption of large output, we can consider with XYZ manipulator, or many side-by-side dispensing machine, small volume, with a single head, or even without XYZ manipulator can be completed.
初，選用雙液點膠機還需求留意各種配件的加裝，例如液體若有添加物或需配合真空脫泡時，料桶需加裝電動攪拌器;液體有因溫度變化影響操作性時，料桶或管路需加裝溫控零碎。更多相關成績，歡送征詢紅杉。
Initially, the use of dual-liquid dispensing machine also needs to pay attention to the installation of various accessories, such as adding liquid additives or vacuum defoaming, the barrel needs to be equipped with electric agitators; when the liquid temperature changes affect the operability, the barrel or pipeline needs to be equipped with temperature-controlled fragments. More relevant achievements, welcome to Sequoia.
綜上所述有濟南互豐工貿有限公司提供，想了解更多雙組份打膠機知識，歡迎關注我們的網站：http://www.hyjsrq88.com謝謝支持！
In summary, all of the above are provided by Jinan Mutual Fung Industry and Trade Co., Ltd. To learn more about the two-component glue machine, please pay attention to our website: http://www.hyjsrq88.com. Thank you for your support!