當前位置：雙組份打膠機的基本操作原理
時間：2018-01-09 來源：http://www.hyjsrq88.com/ 發布人：昌盛機械
1、雙組份打膠機基料泵、固化劑泵及比例泵均采用特殊的高壓柱賽泵，雙向等量供料，基料泵由液壓系統驅動，固化劑泵由氣動馬達驅動。
1, two component glue machine, the base pump, the curing agent pump and the proportional pump all use the special high pressure cylinder pump, the two way equal quantity feed, the base material pump is driven by the hydraulic system, and the curing agent pump is driven by the pneumatic motor.
二者輔以增壓供料壓盤，充分保證高黏度流體的滿腔輸送，基料壓入并增高至高壓，固化劑壓入并增壓，再送至比例泵，固化劑的流量由調比機構調節，二種組份同時送入混合器，充分混合后到達擠膠槍。
The two auxiliary booster feeding pressure plate, and fully guarantee the delivery filled with high viscosity fluid, the base material is pressed in and increased to high pressure, pressure and curing agent into the supercharger, sent to the proportional pump, curing agent flow by adjusting mechanism for adjusting the ratio of two components at the same time, into the mixer after mixing to glue gun.
2. 固化劑過濾器下端出口及混合器進料處均設有高壓球閥，沖膠泄壓用，混合器上設有單向針閥，不但使混膠更加均勻，而且防止兩種組份互竄。
2., there are high-pressure ball valves at the lower end outlet and mixer inlet of the curing agent, which are used for pressure relief, and the one-way valve is used on the mixer. It not only makes the rubber mixing more uniform, but also prevents the two components from channeling.
3.雙組份打膠機液壓/氣動型主要有基料泵、固化劑泵、比例泵、基料泵升降系統、調比結構、混膠結構、氣動系統、液壓系統及電氣系統組成。
3., two component glue machine hydraulic / pneumatic type is mainly composed of basic material pump, curing agent pump, proportional pump, base material pump lifting system, adjusting ratio structure, mixing glue structure, pneumatic system, hydraulic system and electrical system.
4. 升降系統采用手動轉閥控制，兩種組份的比例調節，可通過調整滑塊在擺動桿上的位置來改變。以上是雙組份打膠機的基本操作原理
The 4. lifting system is controlled by manual valve, and the proportion of two components is adjusted. It can be changed by adjusting the position of the slider on the swing rod. The above is the basic operation principle of the double component glue machine
我們用滿腔的熱情、無限的激情對待工作和客戶，我們愿意用勤奮的努力和您一起共鑄美好明天！
We are filled with enthusiasm and passion towards work and customers, we are willing to use the hard work and you create a better tomorrow!
- 中空玻璃生產線的自動化躍遷與產線革命 2026/07/13
- 中空玻璃生產線如何讓兩片玻璃之間“住進”空氣 2026/07/11
- 中空玻璃丁基膠涂布機如何實現“絲滑”涂布？ 2026/07/09
- 雙組份打膠機如何讓密封膠“物盡其用”？ 2026/07/07
- 全自動鋁條折彎機如何為節能門窗打造“鋼筋鐵骨”？ 2026/07/05
- 全自動封膠線破解中空玻璃涂膠均勻性難題 2026/07/03
- 臥式丁基膠涂布機經濟實用實力展現 2026/07/01
- 丁基膠涂布機就是第一道防線的重要作用 2026/06/28
- 雙組份打膠機：精密配比與快捷混合的流體引擎 2026/06/21
- 全自動鋁條折彎機：合理成型與快捷制框的利器 2026/06/19
產品分類Product categories
聯系我們Contact us
- 咨詢熱線：0531-85717458 13705446998
- 公司地址： 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們：
