中空玻璃設備根本保養知識須知
Notice of Basic Maintenance Knowledge for Hollow Glass Equipment
要使得中空玻璃設備使用作用理想，玻璃清洗有效干凈，大程度的延伸其使用壽命，就必需要留意其根本的保養知識。在設備使用過程中留意對其進行正確的保養。怎么保養，專家如此表明。
In order to make the hollow glass equipment work well, clean the glass thoroughly and extend its service life to the greatest extent, it is necessary to pay attention to its basic maintenance knowledge. Pay attention to the correct maintenance of the equipment during its use. How to maintain, experts say so.
中空玻璃設備的保養總體方法不難，要害是要做好對設備滑輪的保養光滑，確保作業時分的電壓安穩，預防電機出現燒毀的狀況，確保設備能夠正常運行就可以了。
Hollow glass equipment maintenance overall method is not difficult, the key is to do a good job of equipment pulley maintenance smoothly, to ensure the voltage stability during operation, to prevent motor burnout, to ensure the normal operation of the equipment.
如果設備在作業期間發生了重大的故障，那么就需要聘請的維修人員前來處理。非人員切莫私行拆機維修。此外需要留意的一點是，當故障發生需要檢修的時分，必需要先把總電源給切斷了。除外，還需要留意的事項包含如下：
If the equipment has major failures during operation, professional maintenance personnel should be hired to deal with them. Non-professionals should not dismantle and repair machines privately. In addition, it should be noted that when a fault occurs and needs to be repaired, the total power supply must be cut off first. In addition, the following items need to be noted:

1.對傳送輥的保護。中空玻璃設備的要害零件傳送輥必需要留意定時進行光滑處理，在設備運轉之前要先查看器光滑狀況，看油位線標是否正常，油位必需要保持在滑標的中心線以上才可以。
1. Protection of conveyor rollers. The key parts of hollow glass equipment conveyor roller must pay attention to smoothing at regular intervals. Before the equipment is running, the smooth condition of the device should be checked to see whether the oil level line is normal or not, and the oil level must be kept above the center line of the slide mark.
2.設備體系的水路保護。設備內的水箱要確保體系水循環的正常，每周要對水箱進行一次有效的清洗，要對噴水嘴進行慣例性的查看，一旦發現有阻塞就要馬上進行疏通清理。此外還有風路的保護，設備風機的運行狀況要保持良好安穩。
2. Waterway protection of equipment system. The water tank in the equipment should be cleaned thoroughly once a week to ensure the normal water circulation of the system. The nozzle should be checked routinely. Once the blockage is found, it should be cleared immediately. In addition, there is the protection of the wind path, and the operation condition of the equipment fan should be good and stable.
綜上所述有濟南昌盛機械提供，想了解更多雙組份打膠機知識，歡迎關注我們的網站：http://linshi.jncsjx.com謝謝支持！
In summary, all the above-mentioned Jinan Changsheng Machinery provides, want to know more about the two-component glue machine knowledge, welcome to pay attention to our website: http://linshi.jncsjx.com Thank you for your support!