1、膠泵：A膠泵、B膠泵和配比泵均采用我公司研制的高粘度流體往復式高壓柱塞泵，結構簡單，性能穩定。高壓閥口均采用合金材料進行特殊處理，硬度可達HRC70o，能有效避免因膠中的硬質顆粒損壞閥口。密封件采用強化聚四氟乙烯，耐摩擦抗腐蝕，可適用絕大多數化學溶劑。使得性能更加穩定，壽命更長。控制閥采用靜面磨削，確保泵內壓力無泄漏。

1. Rubber pump: A rubber pump, B rubber pump, and proportioning pump all use our company's developed high viscosity fluid reciprocating high-pressure piston pump, with a simple structure and stable performance. The high-pressure valve ports are specially treated with alloy materials, with a hardness of up to HRC70o, which can effectively prevent damage to the valve ports due to hard particles in the adhesive. The sealing element adopts reinforced polytetrafluoroethylene, which is wear-resistant and corrosion-resistant, and can be used in the vast majority of chemical solvents. Make performance more stable and have a longer lifespan. The control valve adopts static surface grinding to ensure that there is no leakage of pressure inside the pump.

　　2、動力系統：主泵動力來源于液壓系統，該系統采用進口油泵專用電機，配以進口齒輪泵和換向閥、附件等，油缸為我公式自行生產，密封件采用德國產品，確保整個液壓系統噪音低，性能穩定、壽命長。

2. Power system: The main pump power comes from the hydraulic system, which uses a specialized motor for imported oil pumps, equipped with imported gear pumps, directional valves, accessories, etc. The oil cylinder is produced by our formula, and the sealing components are made of German products to ensure low noise, stable performance, and long service life of the entire hydraulic system.

　　3、STJ01型雙組份打膠機系統為全封閉壓盤密封，使得膠體與空氣完全隔離，不反膠、不氧化。有效延長雙組份的質保期。

3. The STJ01 two-component gluing machine system is fully enclosed with a pressure plate seal, which completely isolates the colloid from the air and does not reverse glue or oxidize. Effectively extend the warranty period of two components.

　　4、升降系統采用手動轉閥控制。比例調節可通過調整滑塊在擺動桿上的位置來改變，當達到要求時擰緊螺母即可。

4. The lifting system adopts manual rotary valve control. Proportional adjustment can be changed by adjusting the position of the slider on the swing rod. When the requirements are met, tighten the nut.

　　5 、可加裝電加熱保溫裝置。

5. Electric heating and insulation devices can be installed.

　　本文由  雙組份打膠機 友情奉獻。更多有關的知識請點擊: http://www.hyjsrq88.com 真誠的態度，為您提供為多維度的服務。更多有關的知識我們將會陸續向大家奉獻，敬請期待。

This article is a friendly contribution from a two-component glue machine. For more information, please click on: http://www.hyjsrq88.com Sincere attitude, providing you with comprehensive service. We will gradually contribute more relevant knowledge to everyone, please stay tuned.