當前位置：底部填充工藝對點膠機有什么性能要求嗎?
時間：2019-12-12 來源：http://www.hyjsrq88.com/ 發布人：昌盛機械
底部填充工藝對點膠機有什么性能要求嗎?
What are the performance requirements of the dispensing machine for the bottom filling process?
底部填充工藝就是將環氧樹脂膠水點涂在倒裝晶片邊緣，通過“毛細管效應”，膠水被吸往元件的對側完成底部充填過程，然后在加熱的情況下膠水固化。
The bottom filling process is to apply the epoxy resin glue point on the edge of the flip chip, through the "capillary effect", the glue is sucked to the opposite side of the component to complete the bottom filling process, and then the glue solidifies when heated.
底部填充工藝對點膠機有什么性能要求嗎?
What are the performance requirements of the dispensing machine for the bottom filling process?
1.底部填充要對膠水進行加熱，要保持膠水的溫度，因此我們的點膠機設備建議要具有熱管理功能。
1. For bottom filling, the glue shall be heated first, and the glue temperature shall be maintained. Therefore, our dispensing machine equipment must have thermal management function.
2.底部填充工藝需要對元器件進行加熱，這樣可以加快膠水的毛細流速，并為正常固化提供有利的保障。
2. The bottom filling process needs to heat the components, which can speed up the capillary velocity of glue and provide favorable guarantee for normal curing.
3.底部填充工藝對點膠的精度要求也很高，尤其是RF屏蔽罩已經組裝到位時，需要要通過上面孔來進行點膠操作。
3. The bottom filling process also requires high dispensing accuracy, especially when the RF shield has been assembled in place, the dispensing operation needs to be carried out through the upper hole.
綜上所述，以上就是底部填充工藝對點膠機的性能方面的要求，我們大家在對底部填充工藝進行點膠的過程中要格外注意，希望對大家有所幫助!
To sum up, the above is the requirements of the bottom filling process on the performance of the dispenser. We should pay special attention to the bottom filling process in the process of dispensing, hoping to help you!
- 中空玻璃生產線的自動化躍遷與產線革命 2026/07/13
- 中空玻璃生產線如何讓兩片玻璃之間“住進”空氣 2026/07/11
- 中空玻璃丁基膠涂布機如何實現“絲滑”涂布？ 2026/07/09
- 雙組份打膠機如何讓密封膠“物盡其用”？ 2026/07/07
- 全自動鋁條折彎機如何為節能門窗打造“鋼筋鐵骨”？ 2026/07/05
- 全自動封膠線破解中空玻璃涂膠均勻性難題 2026/07/03
- 臥式丁基膠涂布機經濟實用實力展現 2026/07/01
- 丁基膠涂布機就是第一道防線的重要作用 2026/06/28
- 雙組份打膠機：精密配比與快捷混合的流體引擎 2026/06/21
- 全自動鋁條折彎機：合理成型與快捷制框的利器 2026/06/19
產品分類Product categories
聯系我們Contact us
- 咨詢熱線：0531-85717458 13705446998
- 公司地址： 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們：
