很多在考慮購買雙組份打膠機的朋友，一直以來會有一個疑問，“中空玻璃自動打膠機的打膠效果怎么樣？好不好用？能不能打滿？需不需要在人工掃尾？”諸如此類的問題。今天筆者就針對這些問題給大家做一個簡單的分析。
Many friends who are considering purchasing a two-component gluing machine always have a question, "How about the gluing effect of the hollow glass automatic gluing machine?" How good is it? Can you fill it up? Do you need to sweep the tail manually? Questions like that. Today, I will give you a simple analysis of these problems.
初入這個行業后發現制作中空玻璃的流程相當?shù)姆爆嵅⑶覍?duì)各個環節的精度要求也非常的高，某一環節精度出現問題都會影響下一個環境的工作，除此之外各個環節也需要大量的工人來操作，并且這些工作都是高度重復的繁瑣工作，其中非常是制作中空玻璃的后一步對中空玻璃進行二次密封的打膠工作，不單單非常的耗費人力并且耗時還非常的長。
After entering this industry, we found that the process of making hollow glass is quite tedious and the precision requirement of each link is very high. Problems in the accuracy of one link will affect the work of the next environment. In addition, a large number of workers are needed to operate each link, and these tasks are highly repetitive and tedious, especially at the end of making hollow glass. One-step gluing for secondary sealing of hollow glass is not only labor-intensive but also time-consuming.
為此筆者經過了解發現了中空玻璃打膠機，該設備可以代替人工來對中空玻璃進行二次密封且制作出來的成品在效果方面也高于人工。
For this reason, the author finds out that the hollow glass gluing machine can replace the manual to seal the hollow glass twice, and the effect of the finished product is also higher than that of the manual.
關于中空玻璃打膠機的使用效果，要從多方面來看。這里面還要看自身玻璃的情況，比如可能玻璃是人工切割的還是用切玻機切割的，是人工合片還是中空玻璃打膠機等等這些都會對中空玻璃打膠機的工作效果產生影響。也許有的朋友會問我，這些工序和中空玻璃打膠機有什么關系。但其實，這是一個前提條件，我們知道明顯一款設備想要提高他的工作，和工作環境、工作基礎都有一定關系。所以在中空玻璃自動打膠機上也是一樣的。
The use effect of hollow glass gluing machine should be seen from many aspects. It also depends on the glass itself, such as whether the glass is cut artificially or by a glass cutter, whether it is artificial laminate or a hollow glass gluing machine, and so on, which will have an impact on the working effect of the hollow glass gluing machine. Perhaps some of my friends will ask me what is the relationship between these processes and the hollow glass gluing machine. But in fact, this is a prerequisite, we know that any equipment to improve his work efficiency, working environment, work foundation has a certain relationship. So it's the same with the automatic gluing machine for hollow glass.

關于臥式中空玻璃打膠機生產的中空玻璃的質量就本人來看還算是比較不錯的，非常是看過朋友之前使用端槍式的打膠機生產的產品以后就更加滿意了。朋友家使用端槍式的玻璃打膠機進行完封膠操作以后還需要對四個角進行修整才行，而臥式中空玻璃打膠機生產出來的中空玻璃基本不需要對四個角進行修邊處理。如果當你發現四個角或者四個邊的膠體過多可以對打膠機進行出膠量如對壓力進行調整或者對打膠速度進行調整，指到調整到佳狀態為止。
As for the quality of the hollow glass produced by horizontal hollow glass gluing machine, I think it is quite good, especially after seeing the products produced by the end gun gluing machine before my friends. Friend's home uses end gun type glass glue machine for sealing operation, but it also needs to trim four corners. Horizontal hollow glass glue machine produces hollow glass without trimming four corners. If you find that there are too many colloids in four corners or four sides, you can adjust the amount of glue produced by the glue dispensing machine, such as the pressure or the speed of glue dispensing, until you reach the optimum state.
關于這個設備的維修是我非常滿意的地方，非常的方便快捷，基本不用廠家派人過來處理，免除了等待廠家過來人的時間。這個設備基本就是個打鐵疙瘩容易損壞的地方就很少，易損件也就是那幾個開關以及各種儀表和電子閥門，而這些地方一旦出現問題在設備的中控臺會給出提示，是哪個部分的哪個元器件發生了損壞，自行更換即可，更換也非常的簡單！當然如果故障比較嚴重的話就只能等廠家派人來修了
I am very satisfied with the maintenance of this equipment. It's very convenient and fast. It doesn't need to send someone from the manufacturer to deal with it, so it can avoid waiting for the manufacturer to come. First of all, this equipment is basically a place where iron bumps are easily damaged. The vulnerable parts are those switches and various instruments and electronic valves. Once there are problems in these places, the central console of the equipment will give a hint, which part of which components have been damaged, can be replaced by itself, and the replacement is very simple! Of course, if the malfunction is serious, we can only wait for the manufacturer to send someone to repair it.
以上就是由雙組份打膠機廠家的小編給我們整理提供的精彩內容了，大家可以收藏我們的網站：http://linshi.jncsjx.com！了解更多行業資訊，謝謝大家的支持！
Above is the wonderful content provided to us by the small edition of the two-component glue machine manufacturer. You can collect our website: http://linshi.jncsjx.com! To learn more about the industry frontier information, thank you for your support!