自動上膠機上膠是一種常見的現象，尤其是高粘度的膠水。一些產品由于過程的需求,建議使用膠水粘度較高,也因?yàn)槟z水粘度高往往會出現畫的現象,從而影響配料的質量和產品的審美程度,如何有效地解決自動配藥機圖紙問題已經成為用戶關注。
Automatic glue machine glue is a common phenomenon, especially high viscosity glue. Due to the needs of the process, some products have to use glue with high viscosity. Because of the high viscosity of glue, the phenomenon of drawing often appears, which affects the quality of ingredients and the aesthetic level of products. How to effectively solve the drawing problem of automatic dispensing machine has become the concern of users.
如何有效解決出膠問題?如果您現有的自動點膠機出現點膠和繪圖的現象，并對產品質量和美觀要求的情況下，不妨從點膠閥即點膠閥來考慮這個問題。
How to effectively solve the problem of dispensing? If your existing automatic dispensing machine has the phenomenon of dispensing and drawing, and the product quality and aesthetic requirements, you might as well consider this problem from the dispensing valve, that is, the dispensing valve.
通常使用的配膠閥可以適應各種類型的膠水，但沒有辦法避免出膠問題;一般情況下，閥門帶有z軸運動，這是影響膠水拉伸的因素之一。為了使點膠過程更加細致，不妨考慮更換點膠閥，使用z軸運動的注射閥，無需與產品表面接觸點膠，噴涂點膠，可以避免出膠問題。
The commonly used glue valve can adapt to various types of glue, but there is no way to avoid the glue problem; in general, the valve with z-axis movement, which is one of the factors affecting the glue stretching. In order to make the dispensing process more detailed, we might as well consider replacing the dispensing valve, using the z-axis movement injection valve, without contact with the product surface dispensing, spraying dispensing, can avoid the glue problem.

濟南雙組份打膠機
Jinan two component gluing machine
如何有效解決出膠問題?Baiqing非接觸式自動噴射閥和氣動分配原則,高穩定性,適用于準確的分配和配藥速度比點膠閥,噴射閥的高精度控制系統,分配劑量2問,頻率280赫茲,100000年海洋保護區的粘度、高速高精度non-drawing塑料配制噴射閥。
How to effectively solve the glue problem? Baiqing non-contact automatic injection valve and pneumatic distribution principle, high stability, suitable for accurate distribution and dispensing speed ratio dispensing valve, high-precision control system of injection valve, distribution dose 2 questions, frequency 280 Hz, viscosity, high-speed and high-precision non drawing plastic preparation injection valve of 100000 year marine reserve.
解決出膠是注射閥的優點之一，精度高、速度快、無接觸是注射閥的真正優點，這些都是傳統的點膠閥無法實現的功能。
One of the advantages of injection valve is to solve the problem of dispensing. The real advantages of injection valve are high precision, high speed and non-contact. These are functions that traditional dispensing valve can not achieve.
.
.