手機越來越智能化，在樣子上也有很大的改變，以前手機有很大的黑邊框，現在手機為了更小化合美觀化，在結構上做了具體的改變，對于點膠技術也有很大要求，不能使用傳統的點膠機作為生產機器，需要采用更的噴射式點膠機。
Mobile phones are becoming more and more intelligent, and there are great changes in appearance. In the past, mobile phones had a large black frame. Now, mobile phones have made specific changes in structure in order to be smaller and more beautiful. They also have great requirements for dispensing technology. Traditional dispensing machines cannot be used as production machines, and more advanced jet dispensing machines need to be used.
噴射點膠機應用在手機行業(yè)有很大的需求，手機窄邊框點膠就是采用了噴射技術，由于窄邊框縫隙很小，普通點膠機無法再內部進行點膠，則需要采用噴射技術，把邊框內部進行噴涂，細小的噴涂效果，保證了手機質量，不僅解決了手機窄邊框點膠需求，也解決了手機主板涂膠的要求。
There is a great demand for the application of spray dispenser in the mobile phone industry. The narrow frame dispensing of mobile phone adopts the spray technology. Because the gap of the narrow frame is very small, the ordinary dispenser can no longer dispense glue internally, so the spray technology needs to be used to spray the inside of the frame. The small spray effect ensures the quality of the mobile phone, which not only solves the dispensing demand of the narrow frame of mobile phone, It also solves the gluing requirements of mobile phone motherboard.

手機內部零件有很多都需要點膠技術，例如：手機攝像頭、鋰電池、主板、玻璃、天線、手機屏幕等等，點膠能起到密封、防水和散熱等效果，不過現在手機對于技術要求有點高，這也是采用噴射技術應用主要核心之一。
Many internal parts of mobile phones need dispensing technology, such as mobile phone camera, lithium battery, motherboard, glass, antenna, mobile phone screen, etc. dispensing can have the effects of sealing, waterproof and heat dissipation. However, now mobile phones have high technical requirements, which is also one of the main cores of spray technology application.
現在智能手機相對以往手機更加智能，不僅薄、超敏屏幕、耐摔，防水等等，工藝需求直線上升，現在還有什么點膠技術可做到，只有視覺和噴射技術結合，才能夠滿足到現在的核心需求了。
Now smart phones are more intelligent than previous mobile phones. They are not only thin, super sensitive screen, fall resistant, waterproof and so on. The process demand is rising sharply. What dispensing technology can be achieved now. Only the combination of vision and jet technology can meet the current core needs.
手機需要點膠位置：手機主板粘合、手機殼涂膠、手機屏幕與邊框粘接、攝像頭粘膠、充電器和耳機等等，不同系列手機，使用工藝要求也不同，點膠技術不同，采用不同的點膠機，中制可滿足到這些技術改變喔！
Glue dispensing positions for mobile phones: bonding of mobile phone motherboard, gluing of mobile phone shell, bonding of mobile phone screen and frame, camera glue, charger and headset, etc. different series of mobile phones have different process requirements and different dispensing technologies. Different glue dispensing machines are used, and Chinese products can meet these technological changes!
我們一直在堅持分享的路上雙組份打膠機http://linshi.jncsjx.com真正為您解決您所需要的問題.
We have been insisting on sharing the two-component gluing machine http://linshi.jncsjx.com Truly solve the problems you need